Insect pheromone longicorn trap

Installation and application instructions of insect pheromone longicorn trap

Components:

2. Installation steps:

1. Insert component C into component B to form a cross plate (as shown in the right figure).

Pay attention to the bottom end of the gap.

2. Connect component A with the hook at the top of the cross plate.

3. Connect component D with the hook at the bottom of the cross plate.

4. Wrap component E under component D and install it.

3. Use methods:

1. The trap is fixed on the non-host tree trunk through the screw holes on both sides of the cross plate. The height of the cross plate of the trap is the same as that of the longicorn.

2. The insect pheromone longicorn trap is an insect trap designed and manufactured by the biological learning of longicorn. It can effectively trap longicorn with longicorn attractant.

3. The trap is suspended before the flying of the pest adults. It is used in conjunction with the attractant. The dosage of the trap can be increased according to the instructions for the use of the attractant.

4. Assembly sketch: